| Specification | Details |
|---|
| Standard Size | 2.1m (height) × 2.4m (length) |
| Optional Size | 1.8m × 2.4m |
| Wire Diameter | 3.5-4.0mm |
| Mesh Size | 50×100mm / 60×150mm (anti-climb) |
| Frame Tube | Φ32mm steel, 1.6mm+ wall thickness |
| Base | HDPE blow-molded (26kg when filled with concrete/water) |
| Surface Treatment | Hot-dipped galvanized |
Superior Wind Resistance: 32kg weighted bases with anti-slip pads and reinforced frame
joints withstand winds up to 105km/h, stable even in coastal
cyclone-prone areas.
Ultra-Quick Deployment: Pre-assembled panels with quick-lock connectors—no tools
required; a 2-person team can set up 100m in just 1.5 hours,
slashing labor time.
Long-Lasting UV Resistance: Dual coating (galvanization + UV-resistant layer) prevents
fading, cracking, or brittleness under 10+ hours of daily
Australian sunlight, service life extends to 6+ years.
Unmatched Stability: High-tensile steel mesh and thickened frame eliminate sagging or
deformation; anti-slip bases ensure firm placement on wet, uneven,
or gravel surfaces.
Applications:
Perfect for coastal construction sites (beachfront developments,
port upgrades), sun-exposed infrastructure projects (highway
repairs, solar farms), large outdoor events (music festivals,
sports tournaments), emergency isolation zones, and temporary
industrial storage areas requiring long-term outdoor use.
Production Process:
Reinforced Frame Fabrication: Frame tubes undergo precision bending and welding at key stress
points, with additional reinforcement plates at joints to enhance
wind load resistance.
Dual-Protection Coating: First, hot-dipped galvanization ensures corrosion resistance;
then, UV-resistant powder coating is applied via electrostatic
spraying for uniform adhesion and long-lasting sun protection.
Base Engineering: HDPE bases are injected with internal structural ribs to prevent
cracking; anti-slip rubber pads are bonded to the bottom to improve
grip and reduce wear.
FAQ:
How does it achieve wind resistance up to 105km/h?
Reinforced frame joints, 32kg filled bases, and anti-slip pads work
together to lower wind resistance and enhance stability—tested in
Australian coastal wind tunnels.
How long does UV coating last?
The UV-resistant layer maintains effectiveness for 6+ years, with
no significant fading or performance loss even in intense sunlight.
Can it be deployed on uneven ground?
Yes—anti-slip bases adapt to slight slopes (up to 7°) and uneven
surfaces, ensuring stability without additional fixtures.
What’s the shipping efficiency?
150 panels fit in a 20ft container (stacked flat, bases nested);
standard orders have a 12-day production lead time, with fast ocean
freight to Australian ports.
Is customization available?
Yes—custom heights (1.5m-2.5m), warning color coatings (yellow,
orange), and logo printing are offered for orders over 100 panels.
